Unicord Super-Fuzz
This is another octave fuzz pedal. it get’s very thick and big.
Download Build Diagram
Download Etch Template
Download Schematic
This is another octave fuzz pedal. it get’s very thick and big.
Download Build Diagram
Download Etch Template
Download Schematic
August 3rd, 2008 at 3:53 am
This looks good! what transistors would you recommend to use?
August 20th, 2008 at 2:08 pm
what are those transistors? great blog. shame theres nothing new since 2007
January 8th, 2009 at 3:09 pm
Hi,
what transistors should I use for this? The schematic says 2SC828 and 2SC539, but I can´t find them.
The newer version on the univox homepage says 2N2222 and 2N3391. But where should I place them?
I guess that the 2N2222 replaces the 2SC828 and the 2N3391 replaces the 2SC539. Is that correct?
February 26th, 2009 at 1:23 pm
mmm u can use germanium after that silicon an compare
March 31st, 2009 at 1:17 pm
I finally got transistors for this. You can still find 2SC828s, Small Bear (US) and Banzai (EU) both stock them.
They have a different pin-out than ‘regular’ transistors so make sure you insert them in the correct way, find a datasheet to confirm.
April 12th, 2009 at 2:00 pm
What is the bias pot? The versions of the Super-Fuzz that I have seen only have 2 pots?
April 22nd, 2009 at 1:29 pm
The bias pot is a trimmer on the inside of the old superfuzz pedals, check the uzzfay site for pics. it was there to help ‘tune in’ the octave effect.